Y Axis Belt Tensioner for CTC A10S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of AHoward's Y tensioner for use on the CTC A10S.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of AHoward's Y axis belt tensioner for the CR-10 so it can be used on the CTC A10S.
The only change I made to the mounting apparatus portion of the model was to add holes so that two 4mm screws can attach it more solidly to the frame with T-nuts.
The screw portion of the model needed to be modified for the smaller 2 piece idler bearing that uses M3 hardware unlike the Creality idler that uses M4 hardware.
The nut is unchanged.
Be advised that the original belt for the Y axis of the CTC A10S was not long enough to use either this model or the original from which it was derived. My CTC A10S is 5 years old, so it was probably due for replacement anyways.