1 / 1
Y Axis Belt Tensioner for CTC A10S — image 1

Y Axis Belt Tensioner for CTC A10S

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix of AHoward's Y tensioner for use on the CTC A10S.

Rating
0 / 5
Likes
1
Downloads
15
Makes
0
Views
125
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of AHoward's Y axis belt tensioner for the CR-10 so it can be used on the CTC A10S.

The only change I made to the mounting apparatus portion of the model was to add holes so that two 4mm screws can attach it more solidly to the frame with T-nuts.

The screw portion of the model needed to be modified for the smaller 2 piece idler bearing that uses M3 hardware unlike the Creality idler that uses M4 hardware.

The nut is unchanged.

Be advised that the original belt for the Y axis of the CTC A10S was not long enough to use either this model or the original from which it was derived.  My CTC A10S is 5 years old, so it was probably due for replacement anyways.

Tags