Estes "Flash" E2X 18mm rocket motor retainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motor retainer to replace your lost one. Wrangled to size from a design by dholvrsn on that other big model site.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
One of our young flyers lost the motor retainer (in flight - exciting!) for the Estes Flash E2X rocket. The rocket isn't much good without the retainer, so I found something close on a 3D model site, then adjusted it to my needs with Lightwave.
It seems to fit well and retain positively - though my PLA prints are likely to get soft from heat - this is not yet flight-tested. I'm expecting to print a half-dozen and keep 'em in my range box.
Printed with PLA (PETG or ABS might be a better choice, for the heat, if you can do so), at 90% infill.