Shorter MK3s+ LCD Cover perfect for small enclosures
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Size can matter, and more compact is more better. Reduce footprint of your MK3 printer by 6 mm.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Why do I need a new LCD cover?
Because in a case every millimeter counts! Although for an outside-enclosure mount it can also help.
Shorter, about 6mm than the stock LCD cover. This works well for my case (pun intended, maybe). I definitely got closure from this (pun intended, probably). I made sure the bed in its frontmost position does not cross over the front of the LCD cover (see second image) so as long as the door of your enclosure closes properly, you're good to go. Disclaimer: Do check it though for yourself in a test! Move your bed all the way to the front and do a visual from the side ;)
All silliness aside; the LCD cover is not just functional but also pretty, with 4 variations so you can pick your favorite. I also updated the chamfers to be more…modern? Centered the hole for the knob, and redesigned the reset button cutout. I like it, I hope you do too.
Variations
Variations to choose from:
- With and without Prusa text.
- With or without ridges
So there's 4 versions; let me know which you went for!
Print settings
Can print in PETG but PLA should work as long as you don't let the case get too hot. Disclaimer: use PETG when in doubt.
Other than that, default print settings should be fine.