1 / 3
Upgraded carriage, sled and filament guide for Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slightly changed carriage, sled and filament guide
- Ocena
- 3,8 / 5
- Polubienia
- 122
- Pobrania
- 1096
- Wydruki
- 6
- Wyświetlenia
- 7810
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 6) (Komentarze: 13)Remiksy (1)Kolekcje (215)Powiązane
Update - 04/09/2024
- Redesigned the complete model from scratch because some "friendly" user notified me of possible flaws in the design.
- Repositioned the holes (in sled as well as the filament guide) and made them a bit smaller (sled) to fit the Ruthex M3x5.7 threaded inserts
Update - 28/07/2023
- made top border a bit bigger to make a better fit for the threaded inserts
- Fine-tuned the teeth on the sled, no more “hiccups” should appear now
Added a “lip” to the carriage to hold and guide the sled because when it was under too much load it could bend upwards.
Repositioned holes in sled and made them a bit bigger so threaded inserts could be used for the screws to position the filament guide.
Made a small adjustment to the teeth of the sled, having more tolerance now.
Redesigned the filament guide to fit in the upgraded parts
