1 / 3
Upgraded carriage, sled and filament guide for Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder — image 1
1 / 3

Upgraded carriage, sled and filament guide for Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Slightly changed carriage, sled and filament guide

Rating
3.8 / 5
Likes
122
Downloads
1,096
Makes
6
Views
7,810
Reviews
5

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Update - 04/09/2024

  • Redesigned the complete model from scratch because some "friendly" user notified me of possible flaws in the design.
  • Repositioned the holes (in sled as well as the filament guide) and made them a bit smaller (sled) to fit the Ruthex M3x5.7 threaded inserts

Update  - 28/07/2023

  • made top border a bit bigger to make a better fit for the  threaded inserts
  • Fine-tuned the teeth on the sled, no more “hiccups” should appear now

 

 

Added a “lip” to the carriage to hold and guide the sled because when it was under too much load it could bend upwards. 

Repositioned holes in sled and made them a bit bigger so threaded inserts could be used for the screws to position the filament guide.
 
Made a small adjustment to the teeth of the sled, having more tolerance now.

Redesigned the filament guide to fit in the upgraded parts