Bigtreetech TFT35 SPI for Voron V0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display mount for V0.1 and V0.2 blank and V0.2 front covers
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 311
- Wydruki
- 4
- Wyświetlenia
- 2107
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This is a display mount for a BTT TFT35 SPI to a V0.
Two parts in total, around 1,5h print time. No supports, you still need to arange them yourself; Cover (stl name v02_spi_display_1 and blank) on its face and the mount itself standing (v02_spi_display_2; angled display flange pointing upwards). Later one might benefit from a brim.
Print settings: minimum 3 walls to avoid tiny solid infill, minimum 3 tops/bottoms; everthing else doesnt matter
Possible colour change between layer 3 and 4 for the V02 cover.
tips for touch calibration if you have a shifted touch:
Tft35 SPI touch calibration : r/BIGTREETECH (reddit.com)
The display shouldnt need rotating
Required hardware:
2 M3x6 (stock display/skirt)
2 M3 nuts (already in the frame from stock skirt or display)
4 M3x8 or M3x10
longer ribbon cable
or
3,6m of wire+ solder or jst xh 2,54 pitch 10 pin; Dupont connectors
screen manual: TFT35-SPI/v2 at master · bigtreetech/TFT35-SPI · GitHub
BTT PI manual: GitHub - bigtreetech/BTT-Pi