Bigtreetech TFT35 SPI for Voron V0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Display mount for V0.1 and V0.2 blank and V0.2 front covers
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 311
- Makes
- 4
- Views
- 2,108
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v2.0
This is a display mount for a BTT TFT35 SPI to a V0.
Two parts in total, around 1,5h print time. No supports, you still need to arange them yourself; Cover (stl name v02_spi_display_1 and blank) on its face and the mount itself standing (v02_spi_display_2; angled display flange pointing upwards). Later one might benefit from a brim.
Print settings: minimum 3 walls to avoid tiny solid infill, minimum 3 tops/bottoms; everthing else doesnt matter
Possible colour change between layer 3 and 4 for the V02 cover.
tips for touch calibration if you have a shifted touch:
Tft35 SPI touch calibration : r/BIGTREETECH (reddit.com)
The display shouldnt need rotating
Required hardware:
2 M3x6 (stock display/skirt)
2 M3 nuts (already in the frame from stock skirt or display)
4 M3x8 or M3x10
longer ribbon cable
or
3,6m of wire+ solder or jst xh 2,54 pitch 10 pin; Dupont connectors
screen manual: TFT35-SPI/v2 at master · bigtreetech/TFT35-SPI · GitHub
BTT PI manual: GitHub - bigtreetech/BTT-Pi