Counting matching models…
i wasn't satisfied with the small touchscreen available and went for a hunt on aliexpress and found this little gem. Only drawback is the somewhat huge bezel, i tried to keep the bezel as minimal as possible to not further increase the…
First of all, I can't speak English, so I don't think the part names and explanations are sufficient. I had a Volon 0.2 on a metal rack and wanted to pull the filament in from the top. Also, I'm a lazy person and can't be bothered to pull…
Simple removable HEPA exhaust filter that easily mounts to the top hat by replacing one of the side or back acrylic pieces. You will need: 1x 24V 80mm fan 1x M3x6 Screw 4x of these filters: link or any other filters with 80x40mm…
I had some glass thermistors lying around and want to use one for my Voron0 as chamber thermistor. I had a look at the 2020 Mount from Nikholas Pcenicni and took his model as reference for my own design. I'm aware, that the Openscad file…
Quite a simple nozzle holder for Revo nozzles. I used some drop in nuts and M3 screws to fit it in place. Depending on how good you printer is dialed in you should be able to push the nozzles in place. Maybe you need to “screw” it in. But…
A backpack for Voron0.2 toolhead to securely mount an E3D PZ board to the toolhead. The board is mounted behind the toolhead which is out of the way of the toolhead, possible toolhead boards and other modifications. While the model is…
i wasn't satisfied with the small touchscreen available and went for a hunt on aliexpress and found this little gem. Only drawback is the somewhat huge bezel, i tried to keep the bezel as minimal as possible to not further increase the…
Bento mini low profile voron0 cradle for “ https://www.printables.com/model/517219-bento-mini-for-bambu-lab-x1c-p1p-and-voron-v02 ”
Remix of https://www.printables.com/model/169127-voron-0-sherpa-mini-mount
Pin mod for voron0 fron idlers, hw needed: pin 3mm OD with length 25-28mm (i got mine locally but there are plenty on aliexpress for example)
After you shrink it by 10 times and put it upside down, you'll get a shoe that is easy to print.
an additionnal ecas at the entry of the voron 0.2 to make the change and the mount of ptfe tubing better and the instalation of an MMU easier you need to print it at vorn spec 4 walls 40% infill ABS
A couple of drawers to add storage to your Voron 0/0.1. I've designed them to mount using the existing nuts that you should already have at the bottom of the front extrusion (originally intended to hold the front skirt) You will also need…
This is a model that I designed to help me make some custom aluminum extrusion pieces for a Voron 0.1 that I am building. While it was used for custom pieces, it could also be used to help you if you cut or source your own aluminum…
This is a bracket adapter for mounting a Meanwell LRS-150-24 power supply to the bottom of a Voron0.1 or Voron0.2 3d printer. It isn't that I distrust modern adhesives, I just might want to replace the power supply one day and I don't…
Inspired by 247printing Main idea of this mod is to make toolhead as light as possible so this is bowden fanless setup. Unfortunately I was unable to tune DropEffect XG for more than 18mm^3/s flow rate so not sure how reasonable is this…
This should accommodate almost any filament spools that you have laying around. Credits go to the VoronDesign crew. I just elangated the part. It's still mostly the original geometry.
5.45mm spacers designed for Voron 0.1 which allow the use of dual X mgn rail. Made custom spacers since I wanted to use them with my alu parts and custom carriage. Print using the same guidelines as for v0 parts Use +5mm screws as in the…
I love this tiny printer but I do a lot of prototyping in PETG and PLA and the stock cooling was just not enough… so I decided to create a tool head of my own. Currently, it supports only LGX Lite due to limited space - I would like to…
Update: Added 15mm offset one. Update: Added 10mm offset one. Siboor kit I recommend offset 10mm one for Display USB issue. Heatset hole is φ4.7mm Tested on Siboor V0.2 kit. Included STEP file for modders! Mellow FLY Gemini V3…
Fixed the shorter mount spacing to match manta 5p for my v0 build.
here is my take for an auxiliary fan for my voron 0.2. i had trouble with printing PLA in the enclosure, because of insufficient cooling for the parts. the mini stealthburner couldn't provide enough partcooling for PLA. i designed the…
Thanks A1lexR for sharing. Just needed a version for threaded CNLinko LP12 terminals. So I remixed your plate. Printed with nobufil ABS+ Kind regards 3dexp
I improved a ‘Voron 0.2 shielded LED bar for Daylight on a matchstick v2.1 by RZT’ by @C0co_838112 This is a remix of a version that can be printed on Voron0 bed (you will need to rotate the model by 45dgr) Original Daylight LED Stick:…
Looking around I couldn't find a means to mount my BTT TFT50 Touchscreen to my Voron0, So I decided to make one :). Be mindful that this suits the 0.2 style legs and not the 0.1. Please note: The original frame insert was backwards (my…
This is the short skirting portion to suit the 0.2 style feet for the voron0 to suit the style I used from Lab3Dp 's Skirting found here: https://www.printables.com/model/364445-voron-02-v02-side-skirt-one-piece. In my opinion, it…
Remix of the crew mods deck panel that uses brass heat to insert LRS-150-24
use M3, M4, M5 * 8 with t-nuts to mount base on frame M5*20 to attach display to mount connect with XH2.54 terminal screen back cover has holes for nessesary pins and buttons for flashing firmware
A very simple, but very secure and stable mounting option for an ADXL/MPU6050 module, utilizing the two m3 inserts on the back of the Voron 0.2 x-carriage, which most alternative toolheads (like the amazing dragonburner ) do not utilize.…
Tiny-M (Voron0 Mod) TopHead with led connectors. I added bicolor parts for fancier look. I am not sure if it is suitable for your printer. Use it at your own risk.
Small clarification on the first link of the 15 x15 profile kit purchased on Aliexpress: only the profiles are delivered, without screws and without panels, and they are not all drilled and threaded, you will have to make the holes…
With Voron0 I have observed that sometimes, chamber's temperature becomes too high. This is especially problematic, when running CANBUS and canboard MCU gets close to it's max temperature of 85 C. Opening lid or door is not a solution,…
Added Genshin Impact content
Check the video - fast transition between each layer when printing! Latest update: I have uploaded STEP file. You can use it to help yourself with assembly. Note that this mod may require you to use different power supply (PSU) unit such…
When you try high voltage steppers, you never want to do 24V again! This mod allows you to install two PSUs (24V and 48V/55V) under the deck and allows you to also apply my belted Z mod . BOM: 1x LOF225 24V PSU 1x LOF225 48V PSU or LOF225…
My plates were just hanging around until today. Since today they are in a nice drawer system. Pretty easy design, but very efficient. Laid out for Voron 120x120mm plates. Some I have are 125mm, so before printing check the size of your…
Cutting with drilling guide for 1515 profile step file include for further modifications.
First of all, I can't speak English, so I don't think the part names and explanations are sufficient. I had a Volon 0.2 on a metal rack and wanted to pull the filament in from the top. Also, I'm a lazy person and can't be bothered to pull…
这是为voron0.2 R1制作的顶罩，我的机器采用了较高的送料管，初始版本的顶罩会有干涉，另外我并没有采购加长尺寸的型材 ，所以 ，我建模打印了这个部分。 与原版相比： 优点在于打印版本省去了型材结构 亚克力板能直接插在槽内 除了顶部之外节省了大量的螺丝 一体化程度更高， 缺点则是3D打印存在精度形变问题，另外由于更改了设计 ，与前门的接缝需要更高的配合。如果组装不到位，就会产生缝隙 顶部螺丝M3*8、背部螺丝M3*12、锁定部分的螺丝M3*10均可用原版替换…
It is a great help during installation to prevent the nuts from moving. During the construction of Voron0, it comes in very handy with the screws of Pocketwatch, TopHat, Bed_Mount. hardware: M3 Square Nuts from Aliexpress (5.5mm x 5.5mm x…
I found the previous mounting brace at the back of the display prevented the mounting to the kirigami bed. I have adjust the hole spacing on the mount to align properly with kirigami as it was little off. No more brace either, its now a…
Connecting the Voron 0.2 heater bed electric wires to a Wago holder. The solution from Fystec only works with it own full metal frame. This solution has m3 holes for connecting to 1515 aluminum extrusion. Do not forget to add 2 extra nuts…
There is some bug in Orca that stretches bed texture images past the origin but this is a fix for that!
Low profile design for 80mm tophat Use 2 heatsets and 20mm standoff
Bracket to cool A/B stepper motors with 4010 fans (or any other thickness). Prevents closing electronic bay BOM for each motor m3x10 x2 m3x12 x1 m3 nut x1 40mm fan
I moved the power supply mounts a little closer to the edge
A little mount for the Voron 0 and the Voron 2. Used camera: OV9726 USB Kamera Modul 66 Grad Feste 30FPS 1MP Stecker-Spielen Für Laptop QR-Code Maschine Webcam Module - AliExpress 7 Glue the Clip to the mount and clip it into the…
