Spacer for Ed Johnson s Y-Splitter for the Bambu Lab X1C AMS Unit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer for the 5mm void at the end of a Quick connect
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The Quick-connect fittings ordered from Amazon have an internal shoulder as a stop for the inserted tube. That leaves a 5mm space at the opposite end (area of the outside thread).
As the filament is always slightly bend to the radius of the spool it might be a hit-or miss for the filament to go smoothly into the Splitter.
To avoid any problems, I made these spacers, filling this void and leading the filament nicely into the splinter,
Dimensions are: height 5mm, inner diameter 2.55 mmm, outer diameter 7,2 mm. The side going into the the Quick-connect is chamfered (0,6mm) for easier insertion.
I printed these in PETG with standard settings (15% fill). I used a raft of 10mm for certain connection to the building plate.
PLA would probably do the job as well.
