1 / 3
Spacer for Ed Johnson s Y-Splitter for the Bambu Lab X1C AMS Unit — image 1
1 / 3

Spacer for Ed Johnson s Y-Splitter for the Bambu Lab X1C AMS Unit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Spacer for the 5mm void at the end of a Quick connect

Rating
0 / 5
Likes
6
Downloads
70
Makes
0
Views
465
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The Quick-connect fittings ordered from Amazon have an internal shoulder as a stop for the inserted tube. That leaves a 5mm space at the opposite end (area of the outside thread).

As the filament is always slightly bend to the radius of the spool it might be a hit-or miss for the filament to go smoothly into the Splitter.

To avoid any problems, I made these spacers, filling this void and leading the filament nicely into the splinter,

Dimensions are: height 5mm, inner diameter 2.55 mmm, outer diameter 7,2 mm. The side going into the the Quick-connect is chamfered (0,6mm) for easier insertion.

I printed these in PETG with standard settings (15% fill). I used a raft of 10mm for certain connection to the building plate.

PLA would probably do the job as well.