1 / 2
4" Bolt on Flange and Drill Guide (Rockler Dust Right Handle Compatible) — zdjęcie 1
1 / 2

4" Bolt on Flange and Drill Guide (Rockler Dust Right Handle Compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This flange works with the Rockler Dust Right Handle system. There is also a drilling template

Ocena
0 / 5
Polubienia
12
Pobrania
59
Wydruki
0
Wyświetlenia
300
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This works with the 4" Rockler Dust Right system.  There are 12 holes to attach it to your equipment - I used #10 sheet metal screws and washers.

 

The flange part printed in less than five hours on my Prusa MK4 with a .4mm nozzle and .3mm layer height, using four perimeter walls and four top and four bottom layers.

 

The drilling template takes about an hour to print.

 

I've included a drilling template that I stuck to the equipment with double sided tape before drilling the pilot holes for the sheet metal screws. For the drilling template, I resized the holes in the parametric table and exported that body for slicing.

 

Also included is an .F3D file if you want to modify the design.

Tagi