1 / 2
4" Bolt on Flange and Drill Guide (Rockler Dust Right Handle Compatible) — image 1
1 / 2

4" Bolt on Flange and Drill Guide (Rockler Dust Right Handle Compatible)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This flange works with the Rockler Dust Right Handle system. There is also a drilling template

Rating
0 / 5
Likes
12
Downloads
59
Makes
0
Views
300
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

This works with the 4" Rockler Dust Right system.  There are 12 holes to attach it to your equipment - I used #10 sheet metal screws and washers.

 

The flange part printed in less than five hours on my Prusa MK4 with a .4mm nozzle and .3mm layer height, using four perimeter walls and four top and four bottom layers.

 

The drilling template takes about an hour to print.

 

I've included a drilling template that I stuck to the equipment with double sided tape before drilling the pilot holes for the sheet metal screws. For the drilling template, I resized the holes in the parametric table and exported that body for slicing.

 

Also included is an .F3D file if you want to modify the design.

Tags