Molex Coupler 4-pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows the coupling of two 4-Pin Molex Cables.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 695
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Works with 4-Pin Molex Cable
The Molex Coupler allows for twisted and non-twisted A & B Data pins (using jumpers). It allows two Bambu Bus Cables or ATX CPU 4-pin cables to be coupled to extend the length of the cable.
Note:
ATX CPU Cable does not twist the wires. Bambu Lab trists the data wires (A & B) to reduce noise/interference during data transmission.
A Printed Circuit Board (with two 4-pin connectors) can be purchased at 3DMachinist Etsy Store.
PCB also has connection points for:
- 24v
- Ground
- A Data Pin
- B Data Pin
Specification:
2x 4-Pin Molex 43045 Micro-Fit 3.0 mm Dual Row
1x 2.54mm 2x4 Pin Header
2x 2.54mm Pin Header Jumper Cap
Compatibility:
X1 Series, P1P, P1S, ATX CPU Cable
If you would like to buy me a cup of coffee.