Molex Coupler 4-pin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows the coupling of two 4-Pin Molex Cables.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 695
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Works with 4-Pin Molex Cable
The Molex Coupler allows for twisted and non-twisted A & B Data pins (using jumpers). It allows two Bambu Bus Cables or ATX CPU 4-pin cables to be coupled to extend the length of the cable.
Note:
ATX CPU Cable does not twist the wires. Bambu Lab trists the data wires (A & B) to reduce noise/interference during data transmission.
A Printed Circuit Board (with two 4-pin connectors) can be purchased at 3DMachinist Etsy Store.
PCB also has connection points for:
- 24v
- Ground
- A Data Pin
- B Data Pin
Specification:
2x 4-Pin Molex 43045 Micro-Fit 3.0 mm Dual Row
1x 2.54mm 2x4 Pin Header
2x 2.54mm Pin Header Jumper Cap
Compatibility:
X1 Series, P1P, P1S, ATX CPU Cable
If you would like to buy me a cup of coffee.