WEN Drill Press Bit Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bit organizer that fits around the column of a drill press and holds metric/imperial drill bits + sanding drums
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 1302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is designed to fit around the column of the WEN 4214T drill press (may fit other brands/models) and holds Imperial/Metric drill bits as well as sanding drums (such as the WEN DS164)
Printer: Prusa Mini - the slicer will complain of the skirt being outside the printable area, but it will print fine.
Nozzle: 0.6mm (Set to 1 perimeter in slicer, since the spacing is very tight)
Filament: I used PLA, but it doesn't matter
I have also included a picture that shows each size bit that fits into each slot. This can be printed out and taped to the side of the holder.