Nerf Dart Launcher for the FPV-Rover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Nerf Dart Launcher for the FPV-Rover (V1.0) http://www.thingiverse.com/thing:1240754 And for the FPV-Rover…
- Ocena
- 0 / 5
- Polubienia
- 151
- Pobrania
- 311
- Wydruki
- 1
- Wyświetlenia
- 3942
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the Nerf Dart Launcher for the FPV-Rover (V1.0)
http://www.thingiverse.com/thing:1240754
And for the FPV-Rover (V2.0)
https://www.thingiverse.com/thing:2952852
From the beginning of building the FPV-Rover, I wanted to have a Nerf Dart Launcher on it.
And finally, here it is. This is the fifth upgrade for the rover and it won't be the last.
Intructions and BOM can be found on Instructables
https://www.instructables.com/id/Nerf-Darf-Launcher-for-the-FPV-Rover
Videos:
Print instructions
I've printed all parts from PLA, as nothing is critical on this one. ABS, PETG and all other materials would be fine as well.
1x servo cover
1x battery cover (with or without cutout)
1x dart feeder
1x esc bracket
1x armoured conduit
2x dart launcher
1x base plate
1x top plate
1x servo arm extension
1x nerf dart storage
1x top cover
1x 18650 battery pack (if you want to use 18650 batteries like I do)