Modular Configurable Desk Organization System (McDOS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unclutter your desk with the containers/silos you need. Start with a 5 by 5 grid and build your organizer from there.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Unclutter your desk with the containers/silos you need. Start with a 5 by 5 grid and build your organizer from there. Pen holders, air pod holder, flowerpot holder, large silo and risers (to elevate a holder to your desired height).
Expand to a 5 by 10 by bridging two 5 by 5s together with the flowerpot or 2 by 2 silo.
Note, each piece "plugs" into the 5 by 5 base with a friction fit.
Print instructions
Printing:
1) Drafts prints made on an MK3S+ with PLA and the 0.30mm DRAFT profile.
2) Everything but the 5 by 5 base requires supports (at least at the 0.3mm layer height I used in testing).
Post Printing:
1) Configure your desk organizer any way you want.
2) Push the pieces into the 5 by 5 base (friction fit).
3) Print risers to elevate certain silos to desired height.
4) Use the flowerpot or misc2by2silo to join two or more 5 by 5 grids.
5) Feel free to comment on what other silos or pieces could be added to the collection!