Modular Configurable Desk Organization System (McDOS)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Unclutter your desk with the containers/silos you need. Start with a 5 by 5 grid and build your organizer from there.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 562
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Unclutter your desk with the containers/silos you need. Start with a 5 by 5 grid and build your organizer from there. Pen holders, air pod holder, flowerpot holder, large silo and risers (to elevate a holder to your desired height).
Expand to a 5 by 10 by bridging two 5 by 5s together with the flowerpot or 2 by 2 silo.
Note, each piece "plugs" into the 5 by 5 base with a friction fit.
Print instructions
Printing:
1) Drafts prints made on an MK3S+ with PLA and the 0.30mm DRAFT profile.
2) Everything but the 5 by 5 base requires supports (at least at the 0.3mm layer height I used in testing).
Post Printing:
1) Configure your desk organizer any way you want.
2) Push the pieces into the 5 by 5 base (friction fit).
3) Print risers to elevate certain silos to desired height.
4) Use the flowerpot or misc2by2silo to join two or more 5 by 5 grids.
5) Feel free to comment on what other silos or pieces could be added to the collection!