#0072 [Remix] Prusa Enclosure Top Center Plug - PTFE Tube Gripper (Holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts the top center plug into a PTFE tube holder.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 234
- Wydruki
- 13
- Wyświetlenia
- 1054
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
*** Thanks for checking out this model! ***
If you appreciate what I'm doing, please consider buying me a coffee, and check out my other models!
**********
Looking for MORE upgrades for your enclosure? Consider doing this one too!

**********
I like to feed my filament from the top of the printing enclosure to the printer below. However, if not done just right (i.e. at a bad angle), it creates a high friction point for the filament's path.
This added friction could prevent your MK4 from doing the Z Homing routine properly.
This part was designed to hold the PTFE tube (4mm diameter) perpendicular to the enclosure top surface to minimize any additional friction. The holes (5x) that the PTFE tube sits in is slightly tapered (and about 12mm deep), creating a friction fit that holds the tube in place. The hole also has a small stopper that prevents the tube from being pushed completely through.
No other fittings are needed for this to work - just reuse the rivets that you already have to secure it in place.

Recommendation: print this out of ABS to better handle the higher temperatures of the enclosure.
If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would just make my day. ;-D
Happy Printing!