2.7 inch e-ink display + Raspberry Pi Zero case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a 2.7-inch e-paper display by Waveshare. Fits Raspberry Pi Zero inside.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 921
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A case for 2.7inch E-Ink display HAT and Raspberry Pi Zero. Has a hole at the back to guide the power cable through and some clips on the inside to ensure you don't damage the Pi when pulling by the cord too hard.
I designed the case to host my Pregnancy Tracker project.
The case doesn't fit a full Raspberry Pi - just the Zero version. Small modifications would be required to ensure the larger one fits but I haven't had the need to make them. Fusion 360 files are included so everyone is welcome to remix the model.
Assembly
The display is mounted to the case using 3 M3x5 screws. Another 4 screws are used to assemble both parts of the model together.
Printing recommendations
- Nozzle sizes: 0.6, 0.4, 0.2 (many of the walls are 1.2mm thick)
- Supports: yes (organic works quite well)