1 / 4
Muli bicycle (E-bike) battery rain cover / Shimano BT-E8010 — zdjęcie 1
1 / 4

Muli bicycle (E-bike) battery rain cover / Shimano BT-E8010

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,38 € – 0,47 € netto (bez VAT)

Dla pliku: Muli Rain Cover 1.6.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,43 € netto (środek widełek).

Masa podana przez autora
4 g
Czas druku podany przez autora
29,4 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A cover for the battery compartment of the muli carrier cycle (https://muli-cycles.de/de/bikes/motor) Shimano BT-E8010

Ocena
4,5 / 5
Polubienia
10
Pobrania
298
Wydruki
3
Wyświetlenia
1486
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 

Would appreciate your make, a like and/or voting ;-)

The wonderful Muli cycle carrier bike (https://muli-cycles.de/de/bikes/motor) has one weak point.

When the bike is set out to rain/ wet weather-conditions, water tends to stay in the battery compartment.  When putting the battery back in the e-motor does not work as water stays around the contacts

This part should be available as rubber cover by the producer, but isn't. This version v1.6 is the best fitting PLA testprint and worked fine even in heavy rain. Recommend PETG.

Also fits on other bikes with a Shimano BT-E8010 like the omni.

 

2024/02 Added a version v.2 which with increased stability

 

 

 

Tagi