Ulta minimalist filament rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a simple filament shelf that used the existing wood structure in a closet.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple pipe holding brackets to keep two pieces of conduit from rolling away from each other. The weight of the spools hold the conduit pipes in position.
I cut mine to the width of the existing shelf in my closet, and removed the old shelf so I could see up through the pipes to view the colors. Gave me room for a front and back row and space to pull spools down in between.
Uses almost no filament. I recommend just printing them solid. I printed one per foot of pipe length, but that might be overkill.
Pick the file based on the outside diameter of the pipe. I've added .25mm to the measurement to give it a little wiggle room.