45° LED Light Strip Bars, Optional Diffuser, Ikea Lack Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for LED strips, with a 45° cast. Perfect for printer enclosures. Can be joined.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 131
- Wydruki
- 2
- Wyświetlenia
- 1399
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple little lightbars to house a 10x200mm LED strip. Perfect for enclosures.
I was unhappy with the original lighting in my Ikea Lack Enclosure because it was misplaced and left the hot-end in shadow. These simple little lights fix the problem and also contain the spill well.
All parts printed in PETG. The diffuser panel was printed in clear PETG but deliberately printed cold, to exploit the diffused effect. The main casing was printed upright, without the need for supports. Each bar is mounted with three 3.5 x 25mm woodscrews.
I have included a few different end options and will likely make an edit to allow several sections to be joined, for a longer unit.