Garden Plant Support Stakes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy support stakes to help hold up and brace plants in the garden.
- Ocena
- 5 / 5
- Polubienia
- 131
- Pobrania
- 610
- Wydruki
- 5
- Wyświetlenia
- 2159
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Strong support stakes to help brace and hold up a plant. We had pepper plants in the garden that were leaning over as the peppers grew. Made these to help them stand up straight.
I made 3 sizes. I find the Long one to be the best size for use in the garden.
Long - 280mm
Medium - 205mm
Short - 130mm
Print Settings
I recommend using PETG for additional strength and to hold up better outdoors with sun exposure and temperature changes. PLA may work too, but PLA can become brittle in cold temperatures and can break down over time in the sun.
Print laying the flat back part down. The Long version should fit on most printer beds when oriented 45 degrees.
Printer: AnkerMake M5
Filament: PETG
Infill: 20% Gyroid
Perimeters: 7
Solid Layers: 7 top, 5 bottom
Supports: No supports required
Layer Height: 0.2mm