Simple Mk3S to Mk3S+ PFTE tube jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig allows Mk3S spare PTFE tubes to be cut down to size for the Mk3S+ extruder body parts.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Jig allows Mk3S spare PTFE tubes to be cut down to size for the Mk3S+ extruder body parts.
Use this jig to trim down the PTFE tubes to the right LENGTH. Does not chamfer, does not shape raw PTFE tubes into useful parts.
To chamfer, I recommend using a 45 degree center drill from Harbor Freight. Insert the smallest center drill, push, and wiggle in a circle motion with the drill running. This will chamfer the tube and open it up close to 60 degrees. A 60 degree center drill is still a better option if available.
(HF Center drill kit - https://www.harborfreight.com/center-drill-countersink-set-5-piece-60381.html )