Simple Mk3S to Mk3S+ PFTE tube jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jig allows Mk3S spare PTFE tubes to be cut down to size for the Mk3S+ extruder body parts.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
Jig allows Mk3S spare PTFE tubes to be cut down to size for the Mk3S+ extruder body parts.
Use this jig to trim down the PTFE tubes to the right LENGTH. Does not chamfer, does not shape raw PTFE tubes into useful parts.
To chamfer, I recommend using a 45 degree center drill from Harbor Freight. Insert the smallest center drill, push, and wiggle in a circle motion with the drill running. This will chamfer the tube and open it up close to 60 degrees. A 60 degree center drill is still a better option if available.
(HF Center drill kit - https://www.harborfreight.com/center-drill-countersink-set-5-piece-60381.html )