1 / 4
703035793C front speaker cover for VW T4 1996-2003 — zdjęcie 1
1 / 4

703035793C front speaker cover for VW T4 1996-2003

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Optimised design of "Speaker cover no. 703035793 for VW T4 Multivan / Caravelle / California" for 3D print

Ocena
5 / 5
Polubienia
94
Pobrania
1317
Wydruki
4
Wyświetlenia
4795
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

About model

My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse.

Compatibility

For T4 Multivan / Caravelle / California. Model year: 1996 to 2003.

Diameter: 180 mm

Modifications

I optimised original VW design for 3D print like so:

  • Grill
    • Flattened
    • Perforation holes replaced by larger honeycomb holes
  • Round margin
    • Merged with grill
    • Outer fillet replaced by printable chamfer without supports
    • Contact face has small edge skirt to eliminate possible optical gaps when installed
  • Clamps
    • Connection to base strenghtened a bit by a fillet to be more snap proof
    • Removed strenghtening ribs on some clamps to add flexibility

Print info

Its an easy print overall. Most “hardest” part of a print for printer is the 35° overhang on a bottom of a clamps, but this shouldn't be a problem for most of nowadays printers.

MaterialPETG (PLA melts, PETG is soft in hot summer)
Layerdefault (0,2 mm or variable layer height)
Infilldefault (15%+)
Supportsdefault (not needed)
Nozzledefault (0,4 mm)
Duration± 6,5 hrs (Prusa MK3S - 100% speed)

If you like my design…

…please click "like", and post a make. This will help me to win some prusameters, and help other makers decide if this is a useful model. Thanks.

Tagi