1 / 7
Pimoroni Pibow Coupe 4 case SSD mount 2.5 inch drive for Raspberry Pi 4 — zdjęcie 1
1 / 7

Pimoroni Pibow Coupe 4 case SSD mount 2.5 inch drive for Raspberry Pi 4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is a simple design to hold a 2.5'' SSD drive below a Raspberry Pi 4 Coupe Case. In order for the Pi to have air…

Ocena
0 / 5
Polubienia
8
Pobrania
63
Wydruki
0
Wyświetlenia
768
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

Here is a simple design to hold a 2.5'' SSD drive below a Raspberry Pi 4 Coupe Case.

In order for the Pi to have air flow, the SSD is held away from the base.

This was designed to be used with a Pi running Home Assistant, replacing the SD card with the SSD.

I replaced the plastic nuts and bolts with 30mm M3 bolts and screwed straight into the plastic, no nut needed.

I printed this in PETG but any material would suit. You may need to print with a brim as it's only a few walls think.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.2

Infill:

N/A

Filament: eSun PETG Yellow


Notes:

A brim may be needed, as only a few walls thick and may lift. YMMV

Category: Computer

Tagi