Water Jug Cap Protector Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple removable cap for a particular type of water jug, meant to keep out dust/debris from the spigot.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I bought a few of the water jugs linked below. The design is good, they stack well, and are great for camping and/or disaster prep. Only trouble is, the spigot is stored in the cap and allows for dirt/debris to enter the spigot where clean water should flow.
https://www.amazon.com/gp/product/B001QC31G6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
In the past I would put some tape over the spigot hole in the cap, which was fine, but that made the cap more prone to collect dust/dirt and is wasteful. Figured I would create some covers to help mitigate the issue.
Ordered two batches of these containers, one set with 6 nubs, another with 8, hence the two models. Support is needed for the little clip bits at the ends, printed these with 0.6mm nozzle.