SV07 Y Axis End Stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevent built plate stuck on the y axis.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 277
- Wydruki
- 2
- Wyświetlenia
- 1253
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.

https://www.youtube.com/channel/UCBjyI1E1HROh1BAYgeRZy7g
Support my work: (click on image)

https://www.buymeacoffee.com/savagelau
You can get commercial license from here: (click on image)

https://www.patreon.com/SavageLau
______________________________________________________________________________________________________________
So, my SV07 have one problem, if I pull the build plate all the way to the front. The bottom of build plate will stuck on the y belt tensioner part and cause problem. It could be only happen on mine, but if you have similar problem, this could be a simple solution for you.
