Prusa Mini Support Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After creating (https://www.prusaprinters.org/prints/40128-prusa-mini-xz-support) I still found that when printing…
- Ocena
- 5 / 5
- Polubienia
- 146
- Pobrania
- 572
- Wydruki
- 11
- Wyświetlenia
- 5898
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After creating (https://www.prusaprinters.org/prints/40128-prusa-mini-xz-support) I still found that when printing tall thin parts the Mini would knock them over if moving fast over long distances. I attributed this to the small amount of flex between the foam legs and the XZ support.
The legs connect to the 3030 aluminium extrusions using two M5 x 12 mm hexagon head cap screws and T nuts. This allows you to place them pretty much anywhere. They also consist of a leg and screw that allows you to adjust the height of each one individually.
I really like the look and so far looks like it helps to reduce flex as I haven't knocked over any more tall parts since the upgrade.
Print instructions
I printed everything at 0.2 layer height with 3 perimeters. There is also no need for supports.