Paw Patrol Coin for Jet Command Blaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coin projectile replacement for the Paw Patrol Jet Command Blaster
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 342
- Wydruki
- 3
- Wyświetlenia
- 1218
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a coin for the Paw Patrol Jet and Command Center. It is used in the jet portion as a “projectile,” meaning these go missing around the house quite a bit. Performance is on-par with the original coins.
There is one file for the complete coin, as well as a file for half the coin to be printed double and glued together (no bridging required for this one).
Photos shown are printed in Elegoo PLA at 210/65 with a .2 layer height. If the aesthetics are a little more important to you, I recommend a .12 layer height and to use the ½ coin file.
V2: Rounded outer edge more, evened out heights of protruding areas.