1 / 6
Extension Cord Holder/Hook — zdjęcie 1
1 / 6

Extension Cord Holder/Hook

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This holder/hook is attached to angle iron and is used to drape an extension cord over it.

Ocena
0 / 5
Polubienia
11
Pobrania
16
Wydruki
0
Wyświetlenia
374
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This model is used to hold an extension cord and is fastened to angle iron.  It is designed to keep the edge of the angle iron from cutting into the insulation.  The cord can easily be lifted and removed.

The angle iron is not necessarily symmetrical and is the reason there are two models.  One has a chamfer and one has a fillet on the edge to denote the difference between the two.  The Fusion 360 model has been provided to modify if your angle iron has different dimensions.

Tagi