Gardena Micro-drip tube holder with hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These tube holders for Gardena's Micro-Drip hold down 13mm tubing with more force then the original tube holders do.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I'm a big fan of Gardena's Micro-drip system, but needed some tube-holders with more force then the once sold by Gardena. Looking at existing designs, inspired me to create this modal which prints without support, but has the length and strength to holde tubes down, even in sandy soils. Although not a real remix, as I designed the model from scratch, I still consider it a remix as the design was heavily inspired by two existing models:
- I took the flat top surface idea from https://www.printables.com/model/204764-gardena-micro-drip-hose-spike/files . Makes it real easy to push the tube holder into to the soild
- I used the idea of spikes from https://www.printables.com/model/527422-distribution-tubing-holder-for-micro-drip-irrigati/files#preview , although I went for three direction of spikes instead of four. By doing so, the design can be printed without support.
I've printed mine in PETG, which gives perfect strength.
Printed on Prusa MK3S+ with Variable Layer Height used in Prusa Slicer.
With proper outlining you would be able to print eight instances at once, which took me just over eight hours.