1 / 2
Cupholder Drain Plug - 1/4" Tubing - Screw On
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to add drainage to boat cupholders - like on the Pontoonstuff center console.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 228
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Drill 12mm" hole. Seal with caulking. Tighten nut to get watertight seal.
Add 1/4" drainage tubing. Tighten with zip-tie if necessary.
Note: This hole is a bit smaller than ideal. Clogging may occur.