Liczymy pasujące modele…
Big Chill Pontoon boat 1:8 Scale ---------------------------------------------------------------------------------------------------------------- Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non…
1:8 Scale tandem axle trailer for Big Chill Pontoon Boat Big Chill pontoon boat here: https://www.printables.com/model/797773-big-chill-rc-pontoon-boat-by-black-crow…
Takes around 4 and ½ hours to print No supports I recommend using hot glue to glue on the parts. There are pins in the back of the pontoons that help line them up to the boat. I just eyeballed the front part of them. Glue on the roof and…
this kayak/canoe outrigger stabilizer pontoon is expandable to whatever segments you like use ¾" pvc pipe in the center hole fill-up the cavity with expandable closed cell foam or flotation foam for buoyancy and glue the segment with…
Used in the Soviet army since the early 70's. DPP40 stands for Desantniy (airborne) Pontoon Park, 40t, what is the maximum vehicle weight, the system can carry. I’m not a military expert, but my first idea, when reading about was – if…
This is made for holding carabiners on your seadoo pontoon (any model).
Yet another toy bot! Most of the boats on thingiverse tend to capsize easily due to the buoyancy of 3d printed object. I hit on the idea of making a pontoon boat so that it would sit more stably in the water. It features an open area in…
2.5" wide by 2.75" long by 1.25" tall Printed in PLA with a 0.16mm layer height, 30% infill, 6 wall line count, and 10 top and bottom layers.
Rescue air boat for my float plane using pvc pipe, 4 soda bottles(Vezu soda 76mm dia). Note that full throttle reverse may cause the boat to capsize. Program throttle on Tx accordingly. Needs 1/2-inch PVC schedule 40 pipe 45-Degree S x S…
Time for the boats (Or other floaty things)! Has air trapped inside to offset weight on the water. Might need a little support on the ends. If your printer isn't terribly well tuned, you might need to seal it for it to be totally…
This is a reinforced replacement ‘H’ bracket for a pontoon's bimini or canopy top. I designed this for my parents' South Bay pontoon after the original aluminum brackets broke after a few years of use. I added reinforced ridges on the…
It is very tired to fill a fishing pontoon by a footpump. Why not make it easy. I have a 12V air pump for my flattable boat and air mattress.But it dont have enough pressure to open valve that stop air leak. So make the fitting to open…
Pontoon Raft Tub Toy This tub toy is a Pontoon raft with corner posts held on by magnets. Great for ring toss, or knock the post into the tub. I suggest making two pairs of posts and rings, with each pair a different color. Recommended…
this is the bench mount for the kolibri pontoon
Used with the following solar-tenderer: https://www.amazon.com/dp/B017K6PH1S Also requires self-tapping M2 screw
Pontoon boat, designed on cad program. Great for pool or bath toy or to put on a desk.
With this tool I was able to unscrew an old leaky valve and fit a new one. Worked really well but will probably be a “one time use” tool.
if upsidown make sure to flip
this is a print in place model of a pontoon boat.
Replacement Oar Guide Slip Ring for a Pontoon boat. It should have a pretty good thread clearance. Worked well on my Ender 3 V2 at 0.16 layer height. Includes threaded Slip Ring and Nut. Printed in ASA filament at 100% infill for strength…
Mounts your GT20 Transducer to the back mounting plate of your pontoon - with no additional tools. Works on various mounting 1/8" thick, 5.5" Wide - mounting brackets using only zip ties to tension. Printable without supports. V2 Size…
I needed a replacement door seat for my pontoon railing doors, so I made these based off the original ones. Printed in ASA for UV, heat, and water resistance — built for life on the water. Print Recommendations: Material: ASA Walls: 4…
Please adjust to your desired dimensions. I tend to like 3.5-4inches for the longest side and .6inches for the depth.
I needed a replacement door stop for my pontoon railing doors, so I made these based off the original ones. Printed in ASA for UV, heat, and water resistance — built for life on the water. Print Recommendations: Material: ASA Walls: 4…
Original flower model: Print in place blooming flower by Jhuttula Specifications Size: Ø120 mm, height 22 mm, rounded edges Pocket: 15-sided, 0.4 mm clearance, 4.8 mm deep, so the flower base sits flush with the top Weight: pontoon ~64 g…
Please adjust to your desired dimensions. I tend to like 3.5-4inches for the longest side and .6inches for the depth.
I needed a replacement door seat for my pontoon railing doors, so I made these based off the original ones. Printed in ASA for UV, heat, and water resistance — built for life on the water. Print Recommendations: Material: ASA Walls: 4…
I needed a replacement door stop for my pontoon railing doors, so I made these based off the original ones. Printed in ASA for UV, heat, and water resistance — built for life on the water. Print Recommendations: Material: ASA Walls: 4…
Have you ever put a Benchy in the water but it just flipped over? Well I’ve solved that problem.
Use a pool noodle as the pontoon, zip tie, and attach to a pvc pipe to the boat.
The hinge is print in place. The top screws into the bottom with M3 screw for maximum strength in the important directions. I also included an ai rendering to show how it can “hold a rod”, because I'm too lazy to wait until I can take a…
(Buttkraken is not on this stl, It is covered with a plaque) 1.5" (38mm) mounting surface and rod hole size 6" (152mm) total height
This model is a simple pontoon boat that will need supports for the deck while printing
This is a remix that basically ensures that the assembly be as sturdy as possible from the original. In all fairness, the original was great, except, I felt that the brackets and base should be printed in one solid piece which is what I…
V1 - use standard bolt/nuts V2 - designed for use of ruthex heatset inserts
Clip based on the clips HERE: https://www.amazon.com/gp/product/B000MJKKKO Has drainage hole with minimal bridging required. Recommend printing in ASA
Built originally to hold my boat hook on the rails of my pontoon within easy reach. I have two different models that are 20mm thick with a 12.5mm radius and another with a 15mm radius to hold two different ends of my boat hook. I also…
this is a 3d benchy attached to a couple of tubes. this toy can float in the bath or anywhere with water. I printed one for my friends baby sibling and the child loved it. Even adults might like it.if you want your print to be as quick as…
Bathtub on pontoons can’t get any simpler than that. probably need to size it up in slicer and low infill for buoyancy.
