Floating pond pontoon for Print-in-place Blooming Flower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Round floating pontoon for the Print-in-place Blooming Flower – drop the flower in and let it float on your pond.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Original flower model: Print in place blooming flower by Jhuttula
Specifications
Size: Ø120 mm, height 22 mm, rounded edges
Pocket: 15-sided, 0.4 mm clearance, 4.8 mm deep, so the flower base sits flush with the top
Weight: pontoon ~64 g + flower ~60 g
Floating: about 11 mm under water, 11 mm above water, ~100 g reserve buoyancy
Stability: wide flat disc, very hard to tip over, no ballast needed
Print settings
Flat side down, no supports
4–6 perimeters, 5–6 top/bottom layers
10–15 % gyroid infill: the closed cells keep any leak contained
PETG is preferable outdoors
FDM prints aren’t fully watertight, so a coat of varnish or epoxy helps
Usage
Align the corners of the flower base with the pocket and push it in