Floating pond pontoon for Print-in-place Blooming Flower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Round floating pontoon for the Print-in-place Blooming Flower – drop the flower in and let it float on your pond.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Original flower model: Print in place blooming flower by Jhuttula
Specifications
Size: Ø120 mm, height 22 mm, rounded edges
Pocket: 15-sided, 0.4 mm clearance, 4.8 mm deep, so the flower base sits flush with the top
Weight: pontoon ~64 g + flower ~60 g
Floating: about 11 mm under water, 11 mm above water, ~100 g reserve buoyancy
Stability: wide flat disc, very hard to tip over, no ballast needed
Print settings
Flat side down, no supports
4–6 perimeters, 5–6 top/bottom layers
10–15 % gyroid infill: the closed cells keep any leak contained
PETG is preferable outdoors
FDM prints aren’t fully watertight, so a coat of varnish or epoxy helps
Usage
Align the corners of the flower base with the pocket and push it in