1 / 4
Extensions for Glock magazines
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
+3 Magazine Extensions for 9 x 19 Glock 17 OEM Magazines.
Additional Hardware Required:
- M3 Threaded Inserts
- DIN 912 M3 x 6mm Hex Socket Head Screw or equivalent
- Soldering iron or long M3 Screw + heat source
- Sharp knife or Dremel
Recommended Print Settings:
- 4+ Perimeters
- 100% Infill
- 0.15mm Layer Height
Instructions:
- Disassemble the magazine
- Remove the two lugs on the bottom of the magazine with a sharp knife or dremel tool.
- Use a soldering iron or a long M3 screw + a heat source to heat and seat the threaded inserts into the provided 4mm blind holes.
- Reassemble the magazine using the original spring and spring retaining plate.
- Lock the extension in place with two M3 x 6mm screws
Local laws apply
If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…