1 / 5
Corne Keyboard High Profile Case With Integrated Plate (CRKBD)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A high profile case for the 5 and 6 column Crkbd (Corne Keyboard) with an integrated switch plate
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 310
- Wydruki
- 3
- Wyświetlenia
- 3195
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 3) (Komentarze: 9)Remiksy (0)Kolekcje (88)Powiązane
Corne Highpro Case With Integrated Plate
Files included for both 5 and 6 column versions
Required Hardware
- 18 x M2 heatset inserts (holes are 3.6mm diameter so most M2 inserts should work) I used https://www.amazon.com/gp/product/B0B8GN63S2/
- 18 x M2 10mm screw
- 10 mm rubber bumpers (depending on column size)
- All your Crkbd components
Printing Instructions
- All models should be printed with supports from the build plate only
- Print the bottom, plate, and island models in normal orientation
- Print the top models upside down (so that the top of the case is against the build plate)
Support Tip:
Set top interface spacing to 0 (meaning a solid top interface) this makes all of the supports in this print come off extremely easily.
Assembly
- Print everything…
- Melt m2 inserts into the underside of the top portion of the case
- Screw case together with 10mm m2 screws from bottom to top, going through the plate and island components
- Attach 10mm bumpers to the recessed portions on the underside of the case