Prusa XL Integrated Steel Sheet Rack / Holder (no supports)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Store your Prusa XL sheets under your print bed
- Ocena
- 4,902 / 5
- Polubienia
- 173
- Pobrania
- 791
- Wydruki
- 46
- Wyświetlenia
- 4099
- Oceny
- 41
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
If you read this, please leave a ❤!
Even if you don't have the enclosure, consider printing my other version instead :) It makes the plates much easier to access
Slide your extra steel sheets into the rack. Sits nice and cozy under the print bed. It is low enough that it does not interfere with bed movement and does not collide.
Re-uses the screws that are already there. No additional hardware is needed.
The sheets are staggered so you can read the labels and can easily grab the one you want
I used PETG just in case it has a hot bed in close proximity
No supports required
Edit #4: Added a 2 sheet version
Edit #3: I've made a new version. This one is angled 3 degrees. It no longer requires bending the plates around the LCD screen. This version no longer uses the stopper at the back.
Edit #2: I noticed some people prefer to orientate the plate names towards the back of the machine. They stick out a little further in that orientation and can touch the cable chain when the bed is completely lowered.
Edit: I've added a longer version that provides additional support. Choose whichever version you prefer.