1 / 1
Inter-Tech 4U-4408 Disk fanshroud single fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cooling Solution for Intertech 4U-4408
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 630
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a disk fanshroud that can be installed behind the harddisks in the Inter-Tech 4U-4408 case. Since the case is pretty compact I had to make some compromises. Also, It is possible it will not fit for you if you have, for example, a dual socket board.
Some tips:
- Use material that is heat resistant.
- You need two pieces. Mirror this model to get the other piece.
- Fits 1x80mm fan per piece.
- Added a little latch on the side to fit your cables + zip tie
- Use some double sided tape to stick it to the bottom.
- You will have to drill 2 holes in your case. One on each side.
- Install one part at a time or else you will probably never get it in.
- Check pictures for some hints.
Print setting are pretty default. 0,4 or 0,6 nozzle, 0.2 layer and no support needed.
*My Case is mounted on the wall - so my fans are blowing through the front :)