1 / 2
Revo Nozzle Removal Tool with Revo Connect adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Revo Nozzle Removal Tool compatible with Revo Connect . Serves as an endpoint to Revo Connect nozzle holders.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 625
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (27)Powiązane
A quick and easy remix of the 2 in 1 Size Revo Nozzle Removal Tool by @BaGooN to fit on the Revo Connect ~ A modular system for storing Revo nozzles by e3d.
Print settings are the same as the original one:
- Filament: PC, TPU, PETG
- Layer height: 0.25mm
- Supports: no
- Perimeters: 3
- Brim: Outer brim 3mm
- Lower the speeds a bit so the adapter prints correctly.
Original note by @BaGooN:
- When printing with heat-resistant materials such as PC, it is possible to try loosening the nozzle even at temperatures above 100°C, which may allow for the removal of stuck nozzles. On the other hand, TPU material is not heat-resistant, but it can be expected to have strong grip.
- This tool is not suitable for removing nozzles that are tightly stuck and difficult to remove.
Enjoy! :)