1 / 2
Traxxas E-Revo 2.0 / VXL RC Car Wall Mount — zdjęcie 1
1 / 2

Traxxas E-Revo 2.0 / VXL RC Car Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stable wall mount for the Traxxas E-Revo 2.0, grabbing the rear lower wishbones

Ocena
5 / 5
Polubienia
54
Pobrania
331
Wydruki
2
Wyświetlenia
2209
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Why?

I needed space under the stairs :-)

Features:

  • Stable wall mount to grab the rear inferior wishbones
  • Rc cars suspension locks the car in place and garantees a firm hold to the wall

Requirements:

  • I printed the mount with a 0,6 nozzle, 4 walls, 4 top and down layers, 0,24mm layer thickness in Sunlu ABS and it came out very stable. Not the most beautiful print to be honest, but it doesn't flex at all under the weight of the car
  • You need a small amount of supports under the “hooks”
  • Mounted to the wall using 4 6x40mm anchors with T25 countersunk screws

As always: comments and feedback very much appreciated :-)

Tagi