1 / 4
Reusable Carbon Filter with Pull Handles for Bambu Lab Printers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of TechwithKramer's reusable filter with Ktek's slicer setting
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 107
- Wydruki
- 2
- Wyświetlenia
- 642
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (23)Powiązane
A remix of @Tech with Kramer's activated carbon filter with the addition of pull handles you can use with your finger nails. Use @Ktech's slicer settings which is copied and pasted bellow for your convenience.
Recommend to print in PETG or ABS/ASA for heat resistance.
CHANGE SLICER SETTINGS TO THE FOLLOWING BEFORE YOU PRINT !
Quality 0.20mm Standard @BBL X1C (0.24mm should be fine too)
Settings
Quality:
- Only one wall on top surfaces = OFF
Strength:
- Wall loops = 5 or 6 (depends on infill pattern)
- Top shell layers = 0
- Bottom shell layers = 0
- Sparse infill density = 25% or higher
- Sparse infill pattern = Aligned Rectilinear OR Triangles OR Honeycomb (AKA Bestagons) OR Grid.
- Infill/wall overlap = 20%
- Infill direction = 0 or 90 degrees
Any infill that doesn't cover the holes basically all work, feel free to play around with the density with different patterns depending on your carbon pellet sizes.