1 / 4
Reusable Carbon Filter with Pull Handles for Bambu Lab Printers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of TechwithKramer's reusable filter with Ktek's slicer setting
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 107
- Makes
- 2
- Views
- 642
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
A remix of @Tech with Kramer's activated carbon filter with the addition of pull handles you can use with your finger nails. Use @Ktech's slicer settings which is copied and pasted bellow for your convenience.
Recommend to print in PETG or ABS/ASA for heat resistance.
CHANGE SLICER SETTINGS TO THE FOLLOWING BEFORE YOU PRINT !
Quality 0.20mm Standard @BBL X1C (0.24mm should be fine too)
Settings
Quality:
- Only one wall on top surfaces = OFF
Strength:
- Wall loops = 5 or 6 (depends on infill pattern)
- Top shell layers = 0
- Bottom shell layers = 0
- Sparse infill density = 25% or higher
- Sparse infill pattern = Aligned Rectilinear OR Triangles OR Honeycomb (AKA Bestagons) OR Grid.
- Infill/wall overlap = 20%
- Infill direction = 0 or 90 degrees
Any infill that doesn't cover the holes basically all work, feel free to play around with the density with different patterns depending on your carbon pellet sizes.