2020 Dumpster Fire Ornament (Dual Color Dumpster and Angled Fire)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified the dumpster to be able to print with two extruders. I also added angles to the flame to make it look less…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 207
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I modified the dumpster to be able to print with two extruders.
I also added angles to the flame to make it look less boxy and use a little less filament. Corners were cut off of the base of the flame to try to account for slight sagging of the corners.
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
20%
Filament: Inland PLA Green and Red
Notes:
The flame now requires support, but make sure to not print support inside the hole for the wire to hang it from.
Category: Decor