Nespresso Holder Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After printing off a bunch of Modular Triptic Nespresso Holder, I've had occasion to buy some off-brand nespresso…
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 168
- Wydruki
- 2
- Wyświetlenia
- 2110
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
After printing off a bunch of Modular Triptic Nespresso Holder, I've had occasion to buy some off-brand nespresso capsules. These don't come in a nice box that can be inserted into the modular holders.
So, this is an insert that goes into the top of these, to make them longer and drop some other coffee pods into them.
As a bonus, I re-made the original design from scratch in F360 and added that file, too.
Print instructions
15% infill, rotate 90 on X in PrusaSlicer to print upright.
Make sure your end gcode moves the print head to Z210 otherwise it will likely knock the print over at the end.