1 / 20
Knipex Pliers (art. 1396200) Protective Cap with Beltholder — zdjęcie 1
1 / 20

Knipex Pliers (art. 1396200) Protective Cap with Beltholder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tight fit. I designed two versions: plier lock slot on one or both sides of the cap. Made of TPU-95A.

Ocena
0 / 5
Polubienia
21
Pobrania
90
Wydruki
0
Wyświetlenia
565
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

You can insert the pliers into the cap with the locking lever deactivated — the cap securely holds the pliers in the closed position. When you take out the pliers, the locking lever is activated by friction. I also designed a double sided version so as not to think about which side to insert the pliers.

Print in the position as in the STL file.

Made of FLEX TPU-95A. 

Printer brand: Flying Bear
Printer: Ghost6
Rafts: No
Supports: No
Resolution: 0.2
Infill: 100%
Filament brand: Esun, Creality
Filament material: eTPU-95A grey, CR-TPU blue
Slicer: Ultimaker Cura 5.4.0
Printing temperature: 240 Celsium
Build plate: No heat
Print speed: 40 mm/s
Fan speed 50%

Tagi